************************************

LSI Corp. MegaRAID Firmware Release 

************************************

Release date: 04/15/2011

====================== 
Supported Controllers:
======================


MegaRAID SAS 9240-4i
MegaRAID SAS 9240-8i


Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 04/15/2011


Version Numbers:	
===============

Current Firmware Package:    20.10.1-0037	
Current Package Details:     APP-2.120.54-1235_BB-2.02.00.00-0001_BIOS-4.24.00_4.11.05.00_0x05020000_WEBBIOS-4.0-45-e_33-Rel_PCLI-03.02-01500008_NVDATA-3.09.03-0018_2011_04_06
			     
Previous Firmware Package:   20.10.1-0029	
Previous Package Details:     APP-2.120.24-1181_BB-2.02.00.00-0001_BIOS-4.21.00_4.11.05.00_0x05000000_WEBBIOS-4.0-44-e_32-Rel_PCLI-03.02-01500008_NVDATA-3.09.03-0011_2011_02_12

			      

Bug Fixes and Enhancements:
===========================
Firmware:
=========
LSIP200167677 (CO) FW should issue STANDBY IMMEDIATE command to SATA disks during shutdown from OS 
LSIP200164222 (CO) Add mfc paramater that enables prints of topology changes in fw serial port output 
LSIP200158868 (DFCT) Power save mode hangs firmware causing driver to send kill adpter command 
LSIP200145892 (DFCT) Liberator FW 10M09 cause system (sles11sp1/rhel6) reset while lspci -vvxxx is used 
LSIP200153454 (DFCT) Firmware Incompleted Writes During Power Fail and Recovery 
LSIP200125226 (DFCT) Red LED is lit on the next empty slot in an specific JBOD if the empy slot is immediatly after an array member 
LSIP200153500 (DFCT) 9280-4i4e unable to import a Foreign Configuration 
LSIP200166039 (DFCT) Label of Virtual Disk not provided by Drive Identify Command 
LSIP200164210 (DFCT) Enable/disable of HDD cache doesn't appear to work 
LSIP200167654 (DFCT) Potential data mismatch found when rebuild is progressing on R1 VD with media error under IO. 
LSIP200166899 (DFCT) HWR: Fw log should indicate if a created/existing VD is already initialized 
LSIP200157150 (DFCT) The new event can't be logged. 
LSIP200156699 (DFCT) MegaCli -AdpAllInfo shows BBU is not supported for Castor cards 
LSIP200153318 (DFCT) FW doesn’t detect the iBBU08 if it is remotely mounting with OEM controller 
LSIP200146481 (DFCT) SMART predictive failure detection takes longer in 10M09 than 10M06 
LSIP200146484 (DFCT) MR FW reports "Unexpected sense, Invalid field in CDB" for LOG SENSE command sent to Seagate drives 

WebBIOS:
========
LSIP200156291 (DFCT) can't create DG with 8 PDs with enableReducedFeatureSet 
LSIP200139977 (DFCT) Option for populating the VD size field automatically 

BIOS:
========
LSIP200139406 (DFCT) 3 9260/80 controllers cant boot from MR LD with post 10M09 12.12.0-0036 - works with 10M08 12.11.0-0016 
LSIP200152136 (DFCT) Attempting to load WebBIOS causes some systems to hang
LSIP200153080 (DFCT) Windows and Linux won't boot using FW 1190 with BIOS 16 
LSIP200142244 (DFCT) System halts in the post after starting VD and PD erase operation and rebooting the system. 
LSIP200156493 (DFCT) There is no space between FW version and capacity in the table where Adp/VD/PD info is displayed 


Installation:
=============
Use MegaCLI to flash the SAS controllers.  MegaCLI can be downloaded from the support and download
section of www.lsi.com.

Command syntax:  MegaCli -adpfwflash -f imr_fw.rom -a0